1 www.pduke.com 2014/04/30 pdl02 series dc-dc converter 2:1 wide input range up to 2 watts features applications ? no minimum load required ? up to 3000vdc input to output isolation ? small size and low profile 0.86 x 0.36 x 0.44 inch ? low output ripple and noise ? ul60950-1, en60950-1, & iec60950-1 safety approvals ? ce marked ? compliant to rohs ii & reach ? wireless network ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment 3000vdc isolation 1600vdc isolation remote control ocp scp technical specification all specifications are typical at nominal input, ful l load and 25 otherw ise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc ma ma % f pdl02-05s33 4.5 ~ 9 3.3 500 35 76 2200 pdl02-05s05 4.5 ~ 9 5 400 35 80 1000 pdl02-05s09 4.5 ~ 9 9 222 40 82 470 pdl02-05s12 4.5 ~ 9 12 167 40 81 170 pdl02-05s15 4.5 ~ 9 15 134 40 83 110 PDL02-05D05 4.5 ~ 9 5 200 40 79 470 pdl02-05d12 4.5 ~ 9 12 83 40 82 100 pdl02-05d15 4.5 ~ 9 15 67 40 81 47 pdl02-12s33 9 ~ 18 3.3 500 20 77 2200 pdl02-12s05 9 ~ 18 5 400 20 81 1000 pdl02-12s09 9 ~ 18 9 222 20 82 470 pdl02-12s12 9 ~ 18 12 167 20 83 170 pdl02-12s15 9 ~ 18 15 134 20 84 110 pdl02-12d05 9 ~ 18 5 200 30 81 470 pdl02-12d12 9 ~ 18 12 83 30 83 100 pdl02-12d15 9 ~ 18 15 67 30 84 47 pdl02-24s33 18 ~ 36 3.3 500 15 78 2200 pdl02-24s05 18 ~ 36 5 400 15 81 1000 pdl02-24s09 18 ~ 36 9 222 15 82 470 pdl02-24s12 18 ~ 36 12 167 15 83 170 pdl02-24s15 18 ~ 36 15 134 15 84 110 pdl02-24d05 18 ~ 36 5 200 15 80 470 pdl02-24d12 18 ~ 36 12 83 15 83 100 pdl02-24d15 18 ~ 36 15 67 15 82 47 pdl02-48s33 36 ~ 75 3.3 500 8 76 2200 pdl02-48s05 36 ~ 75 5 400 8 78 1000 pdl02-48s09 36 ~ 75 9 222 8 84 470 pdl02-48s12 36 ~ 75 12 167 8 83 170 pdl02-48s15 36 ~ 75 15 134 8 83 110 pdl02-48d05 36 ~ 75 5 200 8 80 470 pdl02-48d12 36 ~ 75 12 83 8 81 100 pdl02-48d15 36 ~ 75 15 67 8 81 47
pdl02 2 www.pduke.com 2014/04/30 part number structure pdl02 - 48 s 05 h series name input output output isolation voltage quantity voltage option (vdc) (vdc) 05: 4.5~9 s: single 33: 3.3 : standard type 12: 9~18 05: 5 1600vdc isolation 24: 18~16 09: 9 h: 3000vdc isolation 48: 36~75 12: 12 15: 15 d: dual 05: 5 12: 12 15: 15 input specifications parameter conditions min. typ. max. unit operating input voltage range 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 4.5 9 18 36 5 12 24 48 9 18 36 75 vdc start up time constant resistive load power up remote on/off 5 5 ms input surge voltage 100 ms, max. 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 15 36 50 100 vdc input reflected ripple current with external input capacitors 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 400 150 380 170 map-p input filter (1) capacitor type dc-dc on open or high impedance remote on/off ctrl pin applied current via 1k dc-dc off 2 3 4 ma remote off input current 2.5 ma application circuit dc-dc on dc-dc off output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.2 +0.2 % single -1.0 +1.0 no load to full load dual -1.0 +1.0 % single -0.5 +0.5 load regulation 10% load to 90% full load dual -0.8 +0.8 % cross regulation asymmetrical load 25%/100% fl dual -5.0 +5.0 % ripple and noise 20mhz bandwidth 50 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 500 s short circuit protection continuous, automatics recovery
pdl02 3 www.pduke.com 2014/04/30 general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute input to output standard type 1600 suffix ?h? 3000 vdc isolation resistance 500vdc 1 g isolation capacitance standard type 200 suffix ?h? 40 pf switching frequency full load to minimum load 100 khz safety approvals ul60950-1 en60950-1 iec60950-1 case material non-conductive black plastic base material none potting material silicone (ul94 v-0) weight 4.8g (0.17oz) mtbf mil-hdbk-217f 4.903 x 10 6 hrs environmental specifications parameter conditions min. typ. max. unit operating ambient temperature without derating with derating -40 +85 +85 +100 storage temperature range -55 +125 thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc specifications parameter conditions level emi (2) en55022 class a class b esd en61000-4-2 air 8kv and contact 6kv perf. c riteria a radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (3) en61000-4-4 2kv perf. criteria a surge (3) en61000-4-5 1kv perf. criteria a conducted immunity en61000-4-6 10 vr.m.s perf. criteria a note: 1. it will not damage the device without installing external input capacitors. it?s helpful to reduce input reflected ripple current if external input capacitors are installed. 2. the standard modules meet emi class a or class b with external components. for further information, please contact with p-duke. 3. an external input filter capacitor is required if t he module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: nippon che mi-con ky series, 220 f/100v. caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve pdl02-24s05 derating curve pdl02-24s05 efficiency v s. input voltage pdl02-24s05 efficiency vs. output load
pdl02 4 www.pduke.com 2014/04/30 mechanical drawing pin connection pin single dual 1 -vin -vin 2 +vin +vin 3 ctrl ctrl 5 nc nc 6 +vout +vout 7 -vout common 8 nc -vout *nc pin for standard type model. **no pin for 3kvdc isolation model (suffix ?h?). 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1)
|
